Method setting not taking effect
Make sure to refresh the method by re-selecting it in the [Sample Entry] screen. When you hover over the method name with the mouse the method parameters will be displayed.
Related Articles
Syringe pump cavitation
Syringe pump cavitation (air bubbles in syringe during operation) can be caused by the following reasons; Aspiration line is too long. (Tubing going to reservoir) Syringe pump speed set too fast for the syringe size. Slow down the pump speed to a ...
Linearisation and Calibration
The linearisation is a set of values that should never change. The only case where this may change is when an IR emitter has faulted and the new heat signature from the new emitter is different from the previous emitter. As the emitter is not a ...
Analysis - Import Setup
Importing Your Samples There are only 9 available fields that can be imported into the program. The program only needs to set the formatting once, therefore once the formatting is complete the user will not be asked to format the file again. You can ...