Unable to output results

Unable to output results

  1. Go to [Print Carousel] and then [Format Print].
  2. Turn on the fields to be exported and set the column number for the delimiter position for that field.
  3. Next go to [Print to File] option. Click the [Browse] button and navigate to the directory where the file should be written to.
  4. Enter a name for the file in the field provided. This name will be appended with the date and time stamp from the system.
  5. Click the [Re-make Filename] button and then click the [Write it Now] button.
  6. The file will now be written to the location of choice.

    • Related Articles

    • Sample was heated, but result not measurable and not useable.

      Make sure that the continue analysis on unstable result is checked in the global analysis settings. The results that are marked with an “X” can be output by turning on the [ok] (Bottom right column at bottom of screen) from the [Print Import\Format ...

    • Linearisation and Calibration

      The linearisation is a set of values that should never change. The only case where this may change is when an IR emitter has faulted and the new heat signature from the new emitter is different from the previous emitter. As the emitter is not a ...

    • Analysis - Import Setup

      Importing Your Samples There are only 9 available fields that can be imported into the program. The program only needs to set the formatting once, therefore once the formatting is complete the user will not be asked to format the file again. You can ...