CS2000 Error Writing to File

Your IT department must fix the read/write permissions to your operating directory:

Windows XP: C:\Program Files\CS2000 – Full access

Windows 10 32 & 64 bit: C:\CS2000 – Full access

Error occurs because the user account that is currently logged does not have the appropriate permissions.

• Related Articles

• Analysis - Import Setup

  Importing Your Samples There are only 9 available fields that can be imported into the program. The program only needs to set the formatting once, therefore once the formatting is complete the user will not be asked to format the file again. You can ...

• Error 5004 Samples Schemes

  This error occurs when the system on startup is expecting to load a [Samples Scheme.json] file but this file does not exist or the system has the wrong file path information. To fix this error do the following: Check the [Configuration] screen to the ...

• Controller not running

  The schemes do not have the correct information stored in the *Persistent Scheme.json file. Meticulous care needs to be taken to ensure that the system reads in the all the data correctly. In particular the following schemes are critical to the ...

• Z Axis Constant Move Error

  Adjust the Z Home sensor (Brass Ring) on probed holder. Make sure the magnet is aligned to within 5mm from the end or the front (where wires are) of the switch.

• CS 12132 furnace not heating 2 pulses on proportional controller

  If you see 2 pulses on the proportional controller this means that is has no incoming AC. Check incoming power has not tripped. Places to look are; Switch Board 32A breaker Rear of CS1232 32A Breaker Check wiring inside orange power supply unit